食品科学

• 生物工程 • 上一篇    下一篇

冷榨核桃粕液态发酵制备核桃多肽

高瑞雄,闫巧珍,岳珍珍,雷宏杰,徐怀德*   

  1. 西北农林科技大学食品科学与工程学院,陕西 杨凌 712100
  • 出版日期:2016-10-15 发布日期:2016-12-01

Polypeptide Production from Cold-Pressed Walnut Meal by Liquid-State Fermentation

GAO Ruixiong, YAN Qiaozhen, YUE Zhenzhen, LEI Hongjie, XU Huaide*   

  1. College of Food Science and Engineering, Northwest A&F University, Yangling 712100, China
  • Online:2016-10-15 Published:2016-12-01

摘要:

探讨以冷榨核桃粕为主要原料,采用纳豆芽孢杆菌进行液态发酵制备核桃多肽的方法。分析发酵时间、底物质量浓度、起始pH值、接种量及发酵温度对核桃多肽产量和水解度的影响,并通过单因素试验和Box-Behnken响应面分析法对工艺参数进行优化,得到的最优工艺参数为:发酵时间84 h、底物质量浓度8 g/100 mL、起始pH 8.0、接种量11%、发酵温度33 ℃。此发酵条件下核桃多肽质量浓度和水解度均达到最大值,分别为2.58 mg/mL和37.5%。

关键词: 冷榨核桃粕, 纳豆芽孢杆菌, 液态发酵, 多肽, 工艺优化

Abstract:

Walnut meal, a by-product left after pressing walnuts for oil, contains rich protein and its nutritional value is high.
Polypeptide production from cold-pressed walnut meal by liquid-state fermentation of Bacillus subtils natto was investigated
in this study. The effects of fermentation time, feed concentration, initial pH, inoculum amount, and fermentation temperature
on the content of polypeptide and the degree of hydrolysis (DH) were studied, and these fermentation parameters were
optimized by single-factor experiments and Box-Behnken response surface methodology. Results showed that the optimum
fermentation parameters were determined as follows: fermentation time, 84 h; feed concentration, 8 g/100 mL; initial pH
value, 8.0; inoculum amount, 11% and fermentation temperature, 33 ℃. The maximum content of polypeptide and DH of
2.58 mg/mL and 37.5%, respectively were simultaneously obtained under these optimized conditions.

Key words: walnut meal, Bacillus subtils natto, liquid-state fermentation, polypeptide, process optimization

中图分类号: