食品科学 ›› 2026, Vol. 47 ›› Issue (9): 261-269.doi: 10.7506/spkx1002-6630-20251119-148

• 食品工程 • 上一篇    下一篇

微波和远红外改性对玉米醇溶蛋白结构功能差异的影响

刘颜嘉,李倩倩,王羽,周宇涵,许秀颖,吴玉柱,张浩,赵城彬,刘景圣   

  1. (1.吉林农业大学食品科学与工程学院,吉林 长春 130118;2.吉林农业大学 小麦和玉米深加工国家工程研究中心,吉林 长春 130118)
  • 出版日期:2026-05-15 发布日期:2026-06-03
  • 基金资助:
    现代农业产业技术体系建设专项(CARS-02)

Effects of Microwave and Far-Infrared Modifications on Structural and Functional Properties of Corn Zein

LIU Yanjia, LI Qianqian, WANG Yu, ZHOU Yuhan, XU Xiuying, WU Yuzhu, ZHANG Hao, ZHAO Chengbin, LIU Jingsheng   

  1. (1. College of Food Science and Engineering, Jilin Agricultural University, Changchun 130118, China; 2. National Engineering Research Center of Wheat and Corn Deep Processing, Jilin Agricultural University, Changchun 130118, China)
  • Online:2026-05-15 Published:2026-06-03

摘要: 探究微波(microwave,MW)和远红外(far-infrared radiation,FIR)两种热改性方式对玉米醇溶蛋白结构与功能特性的影响差异。结果表明:两种改性均诱导蛋白二级结构重排,FIR的调控作用相较于MW更为明显;所有改性样品在280 nm处的吸光度均高于对照组,表明改性促使蛋白构象解折叠,使芳香族氨基酸残基暴露;微观形貌上,FIR组均呈片层结构,MW则为多孔网状结构。功能特性方面,FIR-100的热稳定性(峰值变性温度117.62 ℃)、溶解度(48.93%)、持水力(47.05%)、持油力(54.97%)和乳化活性(29.75 m2/g)最优,MW-800则表现出更强的乳化稳定性(48.9 min)、起泡性(82.46%)和起泡稳定性(85.58%)。综上,FIR改性更利于提升蛋白的热稳定性、溶解度、持水持油性及乳化活性,MW改性在增强乳化稳定性和起泡性上更具优势。

关键词: 玉米醇溶蛋白;微波改性;远红外改性;结构特性;功能特性

Abstract: This study investigated the differential effects of two thermal modifications, namely microwave (MW) and far-infrared radiation (FIR), on the structural and functional properties of zein. The results indicated that both modifications induced secondary structural rearrangement, with FIR exhibiting more pronounced regulatory effects than MW. All modified samples exhibited higher absorbance at 280 nm than the control group, indicating that the modifications promoted protein conformational unfolding, resulting in the exposure of aromatic amino acid residues. Microscopically, FIR-treated zein displayed a uniform lamellar structure, while MW-treated zein exhibited a porous network structure. Regarding functional properties, the sample treated with FIR at 100 ℃ demonstrated the best thermal stability (117.62 ℃), solubility (48.93%), water-holding capacity (47.05%), oil-holding capacity (54.97%), and emulsification activity index (29.75 m2/g), whereas that treated with MW at 800 W exhibited superior emulsion stability index (48.9 min), foaming capacity (82.46%), and foam stability (85.58%). In summary, FIR modification is more effective in enhancing protein thermal stability, solubility, water-holding capacity, oil-holding capacity, and interfacial emulsifying activity, while MW modification offers greater advantages in improving emulsion stability and foaming properties.

Key words: zein; microwave modification; far-infrared modification; structural properties; functional properties

中图分类号: