食品科学 ›› 2009, Vol. 30 ›› Issue (15 ): 52-58.doi: 10.7506/spkx1002-6630-200915011

• 基础研究 • 上一篇    下一篇

甘油和油酸修饰大豆蛋白复合膜的研究

孙庆申,王 璞,雷 虹,韩德权,冯 萍,吴 华,程 蒙   

  1. 黑龙江大学生命科学学院,微生物黑龙江省高校重点实验室
  • 收稿日期:2009-02-28 出版日期:2009-08-01 发布日期:2010-12-29
  • 通讯作者: 孙庆申 E-mail:sun19770928@yahoo.com.cn
  • 基金资助:

    黑龙江大学青年科学基金项目(QL200643);黑龙江省青年科学技术专项资金项目(QC06C047);黑龙江大学博士启动资金资助项目

Characteristics of Soy Protein Isolate Films Modified by Glycerol and Oleic Acid

SUN Qing-shen,WANG Pu,LEI Hong,HAN De-quan,FENG Ping,WU Hua,CHENG Meng   

  1. College of Life Science, Key Laboratory of Microbiology, Heilongjiang University, Harbin 150080, China
  • Received:2009-02-28 Online:2009-08-01 Published:2010-12-29
  • Contact: SUN Qing-shen E-mail:sun19770928@yahoo.com.cn
  • Supported by:

    黑龙江大学青年科学基金项目(QL200643);黑龙江省青年科学技术专项资金项目(QC06C047);
    黑龙江大学博士启动资金资助项目

摘要:

利用大豆分离蛋白制备可食性的食品保鲜材料。用不同浓度的甘油和油酸对可食性大豆分离蛋白(SPI)薄膜进行修饰,通过FT-IR 分析成膜粒子的结构变化,对不同薄膜的形态、拉伸强度、水蒸气透过率、光学特性、过氧化值和接触角进行了分析,结果表明:油酸改变了溶液中粒子的基团组成,从超微结构可以看出油酸处理薄膜表面比较粗糙,同时拉伸强度和水蒸气透过率有所降低,机械强度和光学特性与超微结构有密切的关系。另外,pH 值和温度对溶液的成膜特性有直接影响。

关键词: 大豆分离蛋白, 油酸, 甘油, 水蒸气透过率, 接触角, 透光值, 机械性能, 超微结构

Abstract:

The aim of this study was to develop soy protein isolate (SPI) edible films that can be used as food refreshing materials. The SPI edible films modified by different concentrations of glycerol and oleic acid (OA) were prepared. The film-forming dispersions were characterized in terms of the group changes by FT-IR analysis. The appearance, tension strength (TS), water vapor permeability (WVP), optical properties, peroxide value (POV) and contact angle of different films were evaluated. The addition of OA promoted changes in the arrangement of groups on the surfaces of film-forming dispersion (FFD) particles. Microstructure analyses indicated that the OA-treated SPI films had a rougher surface. As regards the film properties, the addition of OA caused a decrease in TS and WVP. The mechanical and optical properties of the films were closely related with their microstructure. In addition, both pH value and temperature had direct effects on the film-forming features of FFD.

Key words: soy protein isolate, oleic acid, glycerol, water vapor permeability, contact angle, opacity, mechanical properties, microstructure

中图分类号: